1. Made from an ethylene glycol base engine coolant
concentrate and used at 40 to 70% concentration in water.
2. Characteristics of the glycol base:
- freezing point -35°C minimum (50 vol% in distilled water)
- boiling point 110°C minimum
3. pH 50 vol% in distilled water between 7 and 8.
concentrate and used at 40 to 70% concentration in water.
2. Characteristics of the glycol base:
- freezing point -35°C minimum (50 vol% in distilled water)
- boiling point 110°C minimum
3. pH 50 vol% in distilled water between 7 and 8.
CHARACTERISTICS OF RECOMMENDED COOLING FLUID
1. Quality of the distillated water:
. total solids 340 ppm maximum (ASTM D1888 test method)
. total hardness 170 ppm maximum (ASTM D1126 test method)
. sulfate 100 ppm maximum (ASTM D516 test method)
. chlorite 25 ppm maximum (ASTM D3634 test method)
2. Reserve alkalinity 10 ml minimum.
3. Including corrosion inhibitors and foam suppressor.
NB: specifications following standards
NF R 15 - 601 June 1991,
BSI 6580 1992 and D3306 1994.
. total solids 340 ppm maximum (ASTM D1888 test method)
. total hardness 170 ppm maximum (ASTM D1126 test method)
. sulfate 100 ppm maximum (ASTM D516 test method)
. chlorite 25 ppm maximum (ASTM D3634 test method)
2. Reserve alkalinity 10 ml minimum.
3. Including corrosion inhibitors and foam suppressor.
NB: specifications following standards
NF R 15 - 601 June 1991,
BSI 6580 1992 and D3306 1994.
AVEL d.o.o.
Automotive Parts and Protection Equipment Manufacturing
Automotive Parts and Protection Equipment Manufacturing
AVEL d.o.o., Nazorjeva ulica 15, 6310 Izola, Slovenia, T: +386 5 6421630, M: +386 41 733125, E: avel-slo@siol.net, E: info@avel.si, I: www.avel.si
